Little Giant® CK Series Magnetic Drive Pumps for Highly Corrosive Chemicals

The Little Giant MD-HC series features leakproof, seal-less magnetic drives and are designed for in-line, nonsubmersible use. Pumping heads are easily rotated, cleaned, or serviced with no special tools required. The spindle shaft is supported at both ends to prevent impeller damage during the start-up and stop of the pump. For use in the circulation of highly corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other highly corrosive chemicals and solutions that are compatible with the pump's material of construction. The workhorse pump is for highly corrosive chemicals and solutions. Although the PVDF pumps do not have run dry capabilities, they handle the broadest range of highly corrosive chemicals with pH values to 11. These pumps have proven themselves to withstand running dry for up to 8 hours without damage.

  • Carbon-filled Kynar® volute, backplate & impeller
  • Carbon-fille Teflon™ (Chemloy) bushing
  • Ceramic shaft & thrust washer
  • Viton™ O-rings
  • Maximum flow: 53 GPM
  • Not self-priming
  • Pumps have conduit box & must be wired in the field
  • Up to 1.1 specific gravity & 100 SSU (20CPS) viscosity
  • 3/4 Hp, 50/60 Hz, 1080/1230 watt motor
  • Maximum temperature: 200°F (fluid) & 77°F (ambient air)
Item # Description Catalog Pg. Price Add to Cart
TE-7-MD-CK Little Giant® Magnetic Drive Pump with 3/4 HP, 115/230v, 1 Phase, TEFC Motor
Item 95064
3214.67/Each
Save 5% when you buy 2+
Save 10% when you buy 4+
Save 15% when you buy 12+
P-517
3214.67/Each