Silcon® Medical tubing is made under proper manufacturing procedures and conforms to the biocompatibility requirements of USP Class VI. Silcon® Medical's surface properties resist sticking and encrustation and will not support bacteria growth. The tubing is soft, pliable, and contains no plasticizers which could leach out, causing flow contamination or tube hardening. Silcon® Medical is not recommended for implantable or in-body uses. Care is recommended in selecting and applying fittings and clamps as sharp barbed fittings, or unlined metal clamps could tear into the tubing wall. If exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced. Reusable will withstand repeated sterilization. Translucent natural color for visual contact with the flow. It may be used on peristaltic pumps. Silcon® is a registered trademark of NewAge® Industries.
- Soft & pliable, contains no plasticizers; natural, peroxide-cured silicon
- Supplied in individual, heat-sealed polybags/sterilize prior to use
- Non-toxic, odorless, tasteless & inert
- Durometer hardness (shore A): 60
- Temperature range: -100°F to 400°F
- Elongation at break: 429%
- Tensile strength: 1305 psi
- Meets FDA & USP Class VI standards
- Sold in full 25' rolls
- Priced per roll, sold in 25' rolls - 25' standard length