Unicoil™ Hose Benders bend straight hose into any shape and keep it bent. They prevent hose kinks, reduce fatigue from repeated bending, and keep hoses away from hazardous areas like hot spots, moving machinery, and walkways. The hose benders are easy to use without special tools or equipment and can be shaped by hand in seconds. To use, slide the hose bender over the hose to where the bend is required, position the spine on the inside of the bend, and then press and bend the spine until the required bend angle is achieved. Each coil bends up to a 90° angle; for bends of 180° or more or to replicate complex hose shapes, additional coils must be used. A snug fit with approximately 0.5mm to 1mm clearance will provide the best performance.
- Stainless steel
- Rustproof
- Works above or below ground & underwater
- Strengthens, protects & provides kink-free bends
- No special tools or equipment needed
- Reusable; Can be bent, straightened & re-bent
- Suitable for water, oil & fuel hoses
- Max. temperature: 257°F
- 4" L