The 610 Series Piston Check Valve incorporates a piston with an embedded o-ring that seals on the seat. Pressure in the flow direction moves the piston and seal off the seat and exposes the cross holes in the piston. Check valves have a maximum operating pressure of 500 psi covers a wide range of air and fluid applications. They are a compact design and have a positive seal at very low back pressure or slight vacuum. The flow arrow on the body will point from inlet to outlet. This check valve has a 3/8"MNPT inlet and a 3/8"FNPT outlet. The body is .87" diameter and 1.69" long.
- Brass body & piston
- Buna-N seals
- Beryllium copper retainer
- Good for a wide range of air & fluid applications
- .297" diameter through hole in ball
- Positive seal at low back pressure or slight vacuum
- Cracking pressure: 1 psi
- Maximum pressure: 500 psi
- Temperature range: -35°F to 250°F