Plastic blowers are an excellent choice for aggressive applications where metal blowers quickly corrode. Metal blowers rely on protective coatings, which develop pinholes and pores. Corrosive vapors seep through and attack the metal, causing failure. The smaller laboratory units have round inlets and outlets, and industrial units (37132) have round inlets and rectangular outlets. There is a range of sizes designed for use in lab hoods and cabinets for more industrial applications. If installing a motor, note that Norton® blowers must not exceed the stated RPM of each blower. NOTE: Blowers are supplied fully assembled in a counterclockwise upblast position. For indoor and outdoor use. All outdoor vertical blower discharge ducts must have weather hoods, no bottom horizontal or down-blast positions. Great where applications include corrosive vapors, dirty, damp, or oily service. The direct-drive motor is more compact, single-speed, fewer moving parts, and no field adjustments. Other options and a full line of replacement parts available for special order upon request; please contact our quotes department at 800-335-6809 or quotes@usplastic.com.
- Drive: Direct
- Motor Enclosure: Explosion Proof
- Wheel Material: Polypropylene; Housing Material: PVC
- RPM: 1725; Horse Power: 1/6
- Power Voltage: 115; Phase: 1
- CFM: 140 - 225
- Static Pressure: 3/4" to 1/4"
- Overall Dimensions: 15-1/2" L x 11" W x 12-1/4" Hgt.
- Round Inlet: 5-5/8". Round Outlet: 4-1/2".