These replacement parts fit SureCan® fuel and utility containers. The spout assemblies fit any 2.2-gallon or 5-gallon SureCan® container. To replace the spout assembly: 1. Pry the locking pin up with a small screwdriver, careful not to damage the can wall. 2. Loosen the nut. 3. Grab the spout elbow, twist, and pull the assembly away from the body of the can. 4. Lubricate O-rings on the new assembly. 5. Insert the end of the spout assembly into the valve opening. Press straight into the valve opening until fully seated. 6. Hand-tighten the nut and then wrench-tighten until the pin reaches the 1 O'clock position, being careful not to over-tighten or cross threads. 7. Press the locking pin down.
- Spout assembly
- Fits 2.2-gallon or 5-gallon SureCan® fuel & utility cans
- Cans sold separately