These pumps are ideal for light construction dewatering or pumping everything from contaminated, dirty water to corrosive liquids. A thermal breaker incorporated in motor windings shuts off power before overheating due to a locked rotor or long periods of running dry (135°F). For permanent installation, the temperature is not to exceed 145°F. For intermittent use, submerge less than 20 minutes in 195°F maximum. WARNING: Not for use in flammable liquids! Consult the chemical resistance chart for compatibility between the pump and fluid.
- Noryl GTX 830
- Viton™ seals
- 316 SS shaft & hardware
- On/off alcohol switch
- 1-1/4" FNPT discharge & a tapered 1-1/2" to 1-1/4" hose barb connections
- Virtually unbreakable, compact & lightweight, only 13.5 lbs.
- Never rusts, excellent for use with acids
- 115V, 60Hz, 1 phase, 500 watts, 0.4 Hp 5 amps, oil-filled motor
- Maximum head: 27'
- Maximum flow: 46 GPM