Construction consists of a liner of silicone elastomer, an open polyester braid reinforcing layer, and a cover layer of silicone elastomer. Care is recommended in selecting and applying fittings and clamps, as sharp barbed fittings or unlined clamps could tear into the hose wall and possibly cause a failure, especially at elevated pressures.
- Peroxide-cured silicone; odorless, tasteless, inert & non-toxic
- Lot traceable
- Not recommended for implantable or in-body uses
- Low pressure sterilized in-line or autoclaved up to 250°F
- Hardness durometer (shore A): 70 (core); 60 (cover)
- Temperature range: -80°F to 350°F
- Max. working pressure @ 70°F: 208 psi; burst pressure @ 70°F: 624 psi
- Tensile strength: 1000 psi; elongation at break: 350%
- Meets FDA & USP Class VI standards
- Priced per roll, sold in 25' rolls - 25' standard length (non-sterile, heat-sealed polybags)