These pumps for buckets and drums offer quick and easy pumping and provide filtration to condition lubricants and prevent expensive equipment failure and downtime. The pumps include a gas- and oil-resistant hose with brass fittings and a hose latch on the head to keep the fittings and cap off the ground. The pumps seal to the bucket or drum to prevent spills and contamination and can pump five gallons in approximately 2-1/2 minutes, even through a filter. These lubrication filter pumps work well with many petroleum-based or synthetic oils such as transmission fluid, motor oil, hydraulic fluid, turbine oils, 80/90 weight gear oils, and double 00 greases. The 5 gallon pumps also feature a handle lock to prevent side-to-side motion during use. An A10 hooked stainless steel filling spout with a ball valve shut off and cap is included. Accessories like replacement filters, filter assemblies, and male and female quick disconnects are sold separately.
- DEHP vinyl hose; PVC inside tube
- Acetal rod & handle; ABS molds; Stainless steel flapper & pin
- Chrome ball check valve; Brass fittings
- A10 stainless steel filling spout with ball valve shut off
- Ten-micron nominal filter with no bypass
- Handle lock prevents side-to-side motion during use
- For metal or plastic buckets
- Output: 5 gallons in 2-1/2 minutes
- Dimensions: 1.313" Dia. x 19" L Tube; 3/8" Dia. x 6' L Hose
- Temperature range: 0°F to 140°F