The AIE 200C is part of our Impulse Hand Operated Sealer C Series, which allows you to seal and trim in one machine. All of our C Series models have a sliding blade that trims excess material 1/4 inch from the seal. EASY 5-STEP USE: 1. Adjust the timer set to your poly plastic application. 2. Press down on the handle to activate the machine. 3. Apply pressure to allow the plastic to cool after the heat light indicator turns off to secure a strong seal. 4. Slide the trimming blade to cut the excess plastic. 5. Release the handle.
- Fast heating: plug in & start sealing
- Adjust the timer to the thickness of the material
- Sliding blade to cut excess material 1/4" from the seal
- Air & watertight seals on most plastic materials up to 6 mil
- 8" (200mm) sealing length
- 2mm sealing width
- 110 volt
- 350 watts
- 60 Hz
- UL listed