LIQUIfit™ is a revolutionary fitting for water systems that solves several problems associated with the push-to-connect fittings used for water treatment, reverse osmosis, and filtration applications. Its full flow profile delivers maximum capability, while its compact push-to-connect design facilitates the tightest tube bends in the industry. It is made of white nylon 11 that features superior mechanical strength and chemical resistance. Seals are EPDM, and they secure connection with a larger surface area than standard O-rings. The full stainless gripping ring eliminates the need for locking clips, and the release button protects and supports tubing. FDA compliant and NSF 61 certified. The temperature range is 35°F to 200°F. Working pressure at 73°F is 230 psi for 1/4", 190 psi for 3/8", and 160 psi for 1/2".Connect - Push the tubing until it bottoms out. Holding and sealing are accomplished instantaneously. Disconnect - First, depress the manual release button, then pull the tubing out of the fitting.
- White nylon 11
- D-shaped EPDM seals
- SS gripping ring eliminates locking clips
- 1/5th the CO2 emissions of an acetal fitting
- Full flow profile delivers maximum capability
- Compact design facilitates the tightest tube bends
- Work. pressure @ 73°F: 230 psi (1/4"), 190 psi (3/8") & 160 psi (1/2")
- Temperature range: 35°F to 200°F
- Meets FDA & NSF 51 & 61 standards
- Dimensions: 0.63" outside diameter on tube ends x 1.04" center line to tube end x 0.96" stem length