This advanced sealant has a high-gloss finish and is specially formulated with Stain Block™ to resist the toughest stains like red wine, grape juice, coffee, mustard, ketchup, and soy sauce without discoloring. It has an excellent bonding strength to various substrates and seals like caulk but sticks like an adhesive when fully cured. It adheres to porcelain, ceramics, fiberglass, painted and unpainted wood, most plastics, metal, glass, plaster, drywall, brick, and masonry. It can be used on sinks, showers, tubs, backsplashes, vanities, countertops, fixtures, metal frames, vents, and siding. It is not recommended for use on vehicles, fish tanks or aquariums, mirrors, or below-waterline or below-grade applications. Note: The surface must be clean, dry, and free from dirt, dust, grease, oil, mildew, wax, loose paint, frost, and old caulking before application. Protect from water until fully cured, as cooler temperatures and higher humidity will extend the cure time. Joint width should not exceed 1/2"; if the joint depth exceeds 1/4", use a backer rod.
- Silicone with high gloss finish; Proprietary polymer for exceptional stain resistance
- Indoor & outdoor use; Water clean-up
- Paintable; Paintability: 24 to 72 hours (Latex & oil-based)
- It has excellent adhesion, is permanently flexible & forms a watertight seal
- Easy application; Won't shrink, crack, or discolor
- Mold & mildew resistant when cured; HomeShield™ Antimicrobial Protection
- Tack free time: < 72 hours at 72°F; Full cure time: Approx. 3 days (3/16" bead)
- Recommended thrust ratio: 6:1 & up
- Temperature range: 40°F to 90°F (Application & storage)
- VOC compliant